bot
13-01-2009, 03:34 PM
للبيع الحديد التركي حديد التسليح متوفر بكل المقاسات السعر مع السحن بسعر 560 دولار
متوافر من المصنع مباشرة في تركيا بدون اي وسيط حيث يمنع الوسطاء من الصفقات التعامل معنا مياشرة
التفصيل moon77_uae@hotmail.com
نبذة عن الحديد التركي
حديد تسليح للبناء "ستيل بار"- صناعة تركية
حديد التسليح للبناء "ستيل بار"- منشأ تركي والمستخدم في منطقة الخليج العربي حسب المواصفات البريطانية (BS4449) ، للاطوال من mm 8 إلى mm 32. والتي تستخدم اساسا للمباني والجسور ، وغير ذلك ، وحسب المواصفات التالية:
http://www.up.3ros.net/get-1-2009-y9tnlyq6.jpg (http://www.up.3ros.net) http://www.up.3ros.net/get-1-2009-qmgs5lfb.jpg (http://www.up.3ros.net)
Steel Bar deformed (reinforcing) length of bar 12 m
Mode BS4449-1997
Size from 8mm up to 32 mm
Specified Tensile Properties
Standard
Grade/
Class
Yield
Stress (N/ mm2)
Tensile/ Yield
Ratio
Elongation
A5 (%)
Elongation
Agt (%)
BS 4449: 1997
460A
460
1.05
12
2.5
BS4449: 1997
460B
460
1.08
14
5.0
EC2: Annex C
500A
500*
1.05
-
2.5
EC2: Annex C
500B
500*
1.08
-
5.0
EC2: Annex C
500C
500*
1.15
-
7.5
*Although EC2, Annex C permits a range of characteristic yield strengths between 400 and 600 MPa, BS 4449 and BS 8110 are being updated for the use of a 500 MPa grade. It is also worth noting that BS4449 and BS 4482 describe ductility in terms of two parameters: the tensile strength to yield ratio (Rm/Re), and the elongation, both at fracture (Ag) and at maximum load (Agt). The symbols used in EC2 for Rm / Re and Agt are ft and eu respectively.
News & Update
Water Scooter
For children and adults (upto the weight of 70 kg) with very attractive price. Contact us for more information
Contact Us
Rice
well as traders, the Basmati Rice, because it simply, with a better taste.
Read More
Typical Analysis of Steels from Different Process Routes
Process
Product
C
Mn
Si
V
CEV
QST
Bar
0.15-0.20
0.60-1.00
0.15-0.30
-
0.30-0.35
Microalloy
Bar
0.15-0.20
1.10-1.30
0.15-0.30
0.05-0.10
0.40-0.50
Stretched
Coil
0.18-0.22
1.10-1.30
0.15-0.30
-
0.40-0.50
Cold Rolled
Fabric
0.05-0.10
0.50-1.00
0.10-0.20
-
0.20-0.30
References
British Standards Institution. BS 4449:1997 : *Carbon Steel bars for the reinforcement of concrete” London pp 19
British Standards Institution . BS 4482: 1985 : “Cold reduced steel wire for the reinforcement” London pp12
British Standards Institution. BS 4483: 1998 : “Steel fabric for the reinforcement of concrete” London pp10
British Standards Institution. BS 8110 Part 1: 1997 : “Structural use of concrete. Code of practice for design and construction” London pp132
British Standards Institution. BS 5400: Part 4:1990 : “Steel, concrete and composite bridges. Code of practice for design of concrete bridges” London pp66
CEN. EN 1992-1-1 “Eurocode 2: Design of concrete structures- Part 1: General rules and rules for buildings”
CEN .EN 1992-2 “Eurocode 2: Design of concrete structures- Part 1: Reinforced and prestressed concrete bridges”
CEN. EN 1992-3 “Eurocode 2 Design of concrete structures- Part 1: Liquid retaining and containing structures”
CEN. EN10080 : “Steel for the reinforcement of concrete- weldable reinforcing steel- General”
Concrete June 2003 pp 8-10 : “Reinforcing Steels: processes and properties” Tony Franks, R-Tech Services
The CARES Guide to reinforcing steels: Part 2. : Manufacturing Process Routes of Reinforcing Steels
The CARES Guide to Reinforcing Steels: Part 6.: Welding and Pre- Fabrication
BRITISH STANDARDS INSTITUTION. BS 7123:1989 : “Metal are welding of steel for concrete reinforcement” London pp 28
BS 8110 (Concrete structures)
BS 5400 Part 4 (Concrete bridges)
BS 8007 (Water retaining structures)
The technical requirements for reinforcement steel in the UK are defined in:
• BS 4449: 1997 (Carbon steel bars for the reinforcement of concrete)
• BS 4482: 1985 (Cold reduced wire for the reinforcement of concrete)
• BS ( bye
متوافر من المصنع مباشرة في تركيا بدون اي وسيط حيث يمنع الوسطاء من الصفقات التعامل معنا مياشرة
التفصيل moon77_uae@hotmail.com
نبذة عن الحديد التركي
حديد تسليح للبناء "ستيل بار"- صناعة تركية
حديد التسليح للبناء "ستيل بار"- منشأ تركي والمستخدم في منطقة الخليج العربي حسب المواصفات البريطانية (BS4449) ، للاطوال من mm 8 إلى mm 32. والتي تستخدم اساسا للمباني والجسور ، وغير ذلك ، وحسب المواصفات التالية:
http://www.up.3ros.net/get-1-2009-y9tnlyq6.jpg (http://www.up.3ros.net) http://www.up.3ros.net/get-1-2009-qmgs5lfb.jpg (http://www.up.3ros.net)
Steel Bar deformed (reinforcing) length of bar 12 m
Mode BS4449-1997
Size from 8mm up to 32 mm
Specified Tensile Properties
Standard
Grade/
Class
Yield
Stress (N/ mm2)
Tensile/ Yield
Ratio
Elongation
A5 (%)
Elongation
Agt (%)
BS 4449: 1997
460A
460
1.05
12
2.5
BS4449: 1997
460B
460
1.08
14
5.0
EC2: Annex C
500A
500*
1.05
-
2.5
EC2: Annex C
500B
500*
1.08
-
5.0
EC2: Annex C
500C
500*
1.15
-
7.5
*Although EC2, Annex C permits a range of characteristic yield strengths between 400 and 600 MPa, BS 4449 and BS 8110 are being updated for the use of a 500 MPa grade. It is also worth noting that BS4449 and BS 4482 describe ductility in terms of two parameters: the tensile strength to yield ratio (Rm/Re), and the elongation, both at fracture (Ag) and at maximum load (Agt). The symbols used in EC2 for Rm / Re and Agt are ft and eu respectively.
News & Update
Water Scooter
For children and adults (upto the weight of 70 kg) with very attractive price. Contact us for more information
Contact Us
Rice
well as traders, the Basmati Rice, because it simply, with a better taste.
Read More
Typical Analysis of Steels from Different Process Routes
Process
Product
C
Mn
Si
V
CEV
QST
Bar
0.15-0.20
0.60-1.00
0.15-0.30
-
0.30-0.35
Microalloy
Bar
0.15-0.20
1.10-1.30
0.15-0.30
0.05-0.10
0.40-0.50
Stretched
Coil
0.18-0.22
1.10-1.30
0.15-0.30
-
0.40-0.50
Cold Rolled
Fabric
0.05-0.10
0.50-1.00
0.10-0.20
-
0.20-0.30
References
British Standards Institution. BS 4449:1997 : *Carbon Steel bars for the reinforcement of concrete” London pp 19
British Standards Institution . BS 4482: 1985 : “Cold reduced steel wire for the reinforcement” London pp12
British Standards Institution. BS 4483: 1998 : “Steel fabric for the reinforcement of concrete” London pp10
British Standards Institution. BS 8110 Part 1: 1997 : “Structural use of concrete. Code of practice for design and construction” London pp132
British Standards Institution. BS 5400: Part 4:1990 : “Steel, concrete and composite bridges. Code of practice for design of concrete bridges” London pp66
CEN. EN 1992-1-1 “Eurocode 2: Design of concrete structures- Part 1: General rules and rules for buildings”
CEN .EN 1992-2 “Eurocode 2: Design of concrete structures- Part 1: Reinforced and prestressed concrete bridges”
CEN. EN 1992-3 “Eurocode 2 Design of concrete structures- Part 1: Liquid retaining and containing structures”
CEN. EN10080 : “Steel for the reinforcement of concrete- weldable reinforcing steel- General”
Concrete June 2003 pp 8-10 : “Reinforcing Steels: processes and properties” Tony Franks, R-Tech Services
The CARES Guide to reinforcing steels: Part 2. : Manufacturing Process Routes of Reinforcing Steels
The CARES Guide to Reinforcing Steels: Part 6.: Welding and Pre- Fabrication
BRITISH STANDARDS INSTITUTION. BS 7123:1989 : “Metal are welding of steel for concrete reinforcement” London pp 28
BS 8110 (Concrete structures)
BS 5400 Part 4 (Concrete bridges)
BS 8007 (Water retaining structures)
The technical requirements for reinforcement steel in the UK are defined in:
• BS 4449: 1997 (Carbon steel bars for the reinforcement of concrete)
• BS 4482: 1985 (Cold reduced wire for the reinforcement of concrete)
• BS ( bye